- 50 gallon per day.

- Solenoid shut off valve (MRO), or  plastic shut off valve(ARO).

- Storage tank- stores the ready to drink permeated water.

- Faucet- to dispense permeated water stored in the tank.

- Electric Pump (System ARO and MRO only)- used in waters
  above 1000 ppm TDS or to increase volume and quality of the
  permeate water when inlet pressure is lower than 1,5 Bar (please
  refer to the installation chapter).

- 3-coloured LED (System MRO only) Indicates unit’s current
  situation (green:producing water; blue:unit on standby, flashing
  green:low inlet pressure; flashing red: inner leak).

- Feed water valve- connects to the cold water line as to supply the
  RO system.

- Drain clamp assembly connected to the drain to remove reject water
  from the RO system.

- Plastic tubing supplies feed, permeate and reject water.